Icynene mold problems: How to avoid them

Check That You’re Installing Real Icynene – Mold Problems Avoided

Icynene ® open cell spray foam insulation has less than 5% water absorption, and Icynene closed cell spray foam insulation rejects bulk water even when immersed. Some other manufacturers and some contractors may pass off over spray foams as “Icynene” or “like Icynene” – but if it’s not the real thing it may perform differently and cause mold problems.

What If I Have A Water Leak?

With any type of Icynene spray foam, when there is a water leak, the water runs straight through the insulation, making it easier to find the source of the leak. If the water becomes completely trapped and is standing in the same place for a long time, be assured that Icynene materials are not a source of food for mold – but remember that the adjacent materials may become wet and moldy from the water. For that reason, whenever you have a water leak, you should repair the source of the leak, and remove any materials that are stopping the water running through or drying out. Do this immediately to avoid mold, and let the Icynene spray foam dry out. With Icynene, mold formation shouldn’t be an issue if you follow these common-sense suggestions.

Reduce the Risk of Mold from Humid Air and Condensation

Icynene spray foams act as air barriers. If you live in a humid climate, or have rooms with high humidity, the moisture in the air may spread through the building and condensate. This water can then lead to mold. When you protect against the movement of moist air using the air barrier formed by Icynene, mold and condensation risks are reduced.

Allergies & Asthma Relief with Icynene – Mold, Allergens and Pollutants Blocked

Some allergies and asthma may be triggered by mold, so using Icynene materials can help you have a healthy home for the above reasons. Also, because it dramatically reduces air filtration, Icynene also helps prevent airborne allergens and pollutants from entering the building.