ICYNENE MD-C-200

ICYNENE MD-C-200^™ is Icynene's leading closed-cell spray foam insulation product from the proven industry leader. It is air-impermeable with a built-in vapor retarder.

MD-C-200 is a one-step performance material which both insulates and air seals a building for the lifetime of the structure.

Icynene MD-C-200 is guaranteed to perform as specified for the life of the building.

Performance Benefits

• Approved for commercial building types I, II, III, IV, and V construction
• Stable thermal performance.
• R-value = 6.0 per inch
• Class II Vapor Diffusion Retarder @1.5"
• Rigid, not flexible composition contributes to wall racking strength.
• Rejects bulk water
• Supports indoor air quality by blocking air infiltration and mass transfer of moisture that may cause mold.

Characteristics

• Closed-cell structure
• Synthetic blown
• Medium density 2.0 lb. nominal
• PBDE-free; blown with HFC 245fa
• Rigid to touch
• Expands 40 times from liquid state
• Apply in 2" lifts
• Will not harm coatings on electrical wiring, plumbing or other building components
• Lowest global warming potential (GWP of 1020)
• Approved for construction types: I, II, III, IV, V
• A low-emitting material (LEM) as per CHPS EQ 2.2 Section 01350 (Collaborative for High Performance Schools)

Construction Benefits

• Yields of 4,500 board feet
• Broad range of substrates, temperatures and humidity conditions
• Superior cold temperature adhesion to multiple substrates
• Dimensionally stable
• 1 day occupancy

LEED Contributions

Icynene MD-C-200 meets prerequisites and may contribute towards these LEED for Homes points:

• EAC1.1: Optimizing Energy Performance
• EAC1.2: Optimizing Energy Performance
• EAC2: Insulation
• EAC3: Air Infiltration
• MRC2: Environmentally Preferable Products

Applications

Can be used in many residential applications:

• Unvented attic
• Vented attic
• Cathedral ceiling
• External wall (interior cavity fill)
• Internal wall
• Bonus room or cantilevered floor
• Crawl space
• Basement wall (internal side)
• Rim joists

And many more applications – find an Icynene licensed contractor to check which Icynene products can be used for your project.

Limitations of Use

Should not be used:

• Against substrates that may exceed 180°F at installation or in the future
• Inside electrical outlets or junction boxes
• Flotation purposes
• Placed above the roofing membrane
• Exterior surfaces, exposed and/or in contact with water

Thermal and Ignition Barriers

See ESR 3199 for details.
Approved thermal barriers:

• DC 315 @22 wet mils, 14 dry mils
• Alternatively, use a prescriptive thermal barrier

Approved ignition barriers:

• No ignition barrier is required

Fire Summary

• ASTM E-84
• Flame index ≤ 25
• Smoke index ≤ 450
• Icynene products are Class 1/Class A Materials